Supermicro X9DRH-7F

MBD-X9DRH-7F-O
Supermicro X9DRH-7F
Sorry, but this product is no longer available to purchase online.

Please contact us to discuss alternative products which may be suitable.
Looking for Compatible Products?
Product Description

Key Features

  1. Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and future E5-2600 v2 family
  2. Intel® C602 chipset; QPI up to 8.0GT/s
  3. Up to 512GB DDR3 1600MHz ECC Registered DIMM; 16x DIMM sockets
  4. Expansion slots: 1 PCI-E 3.0 x16 and 6 PCI-E 3.0 x8
  5. Intel® i350 Dual port GbE LAN
  6. 8x SATA2 and 2x SATA3 ports
  7. 8x SAS2 ports from LSI 2208
  8. Integrated IPMI 2.0 and KVM with Dedicated LAN
  9. 7x USB 2.0 ports (4 rear, 2 via header + 1 Type A)

Specifications

Product SKUs
MBD-X9DRH-7F -O
  • X9DRH-7F (Standard Retail Pack)
MBD-X9DRH-7F -B
  • X9DRH-7F (Bulk Pack)
 
Physical Stats
Form Factor
  • Extended ATX
Dimensions
  • 12" x 13" (30.48cm x 33cm)
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2600
        and future E5-2600 v2 family
        (up to 135W TDP **)
  • Dual Socket R (LGA 2011)
Cache
  • Up to 20MB
System Bus
  • QPI up to 8 GT/s
  ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
 
System Memory
Memory Capacity
  • 16x 240-pin DDR3 DIMM sockets
  • Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
  • Supports up to 128 GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs
DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C602 chipset
AHCI SATA
  • SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
     SATA 3.0 6Gb/s with RAID 0, 1
SCU SATA
  • SATA 2.0 3Gb/s with RAID 0, 1, 10
SAS
  • SAS2 from LSI 2208 (1GB cache)
  • HW RAID 0, 1, 5, 6, 10, 50, 60 support
  • Supports up to 16 devices
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® i350 Dual Port Gigabit Ethernet
  • Virtual Machine Device Queues reduce I/O overhead
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Video
  • Matrox G200eW
 
Input / Output
AHCI SATA
  • 2 SATA 3.0 ports (6Gb/s)
  • 4 SATA 2.0 ports (3Gb/s)
SCU SATA
  • 4 SATA 2.0 ports (3Gb/s)
SAS
  • 8 SAS2 ports (6Gb/s)
LAN
  • 2 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 7 USB 2.0 ports total
    (4 rear + 2 via header + 1 Type A)
Video
  • 1 VGA port
Serial Port / Header
  • 2 Fast UART 16550 serial COM port
    (1 rear & 1 header)
DOM
  • 1 DOM (Disk on Module) power connector
TPM
  • 1 TPM 1.2 20-pin Header
Chassis ( Optimized for X9DRH-7F )
2U Chassis
  • CSE-825TQ-R740LPB
  • CSE-826BA-R1K28LPB
  • CSE-826BA-R920LPB
  • CSE-826BE16-R1K28LPB
  • CSE-826BE16-R920LPB
  • CSE-826BE26-R1K28LPB
  • CSE-826BE26-R920LPB
3U Chassis
Tower / 4U Rackmount
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
 
Expansion Slots
PCI-Express
  • 1 PCI-E 3.0 x16
  • 6 PCI-E 3.0 x8
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
 
Management
Software
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 5+1 Phase-switching voltage regulator
FAN
  • 8x 4-pin fan headers (up to 8 fans)
  • 8x fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • RoHS, Halogen Free
  • Dual Cooling Zones
 
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
Parts List (retail)
  Part Number Qty Description
X9DRH-7F MBD-X9DRH-7F 1 X9DRH-7F Motherboard
I/O Cables CBL-0044L 2 SATA CABLE 61CM FLAT S-S PBF
I/O Cables CBL-0097L-03 2 30AWG 50CM Ipass to 4 SATA, W/50cm SB, S
Optional Parts List
  Part Number Qty Description
Heat Sink
(optional, not included)
- - CPU Heat Sink reference
TPM security module
(optional, not included)
AOC-TPM-XENON-IFN - INFINEON TPM XENON BOARD V1 WITH SLB9655TT1.2FW4.32, HF, RoHS/REACH, PBF About TPM



Reviews

Customer Reviews

There are currently no reviews against this product. Be the first to write a review!

Write a Review

Compatible Products

Sorry there are no compatible products listed. Please contact us to discuss options available for this product.

Downloads

Product downloads

There are currently no downloads available for this product. If you need a specific document, such as a manual, installation guide or datasheet please contact us and we would be happy to help.

YouTube

LinkedIn

Instagram

Call us today on 01283 576162 to talk directly to one of our server specialists

  • Secured by Sage Pay
  • PayPal