Eaton 3U Extended Battery Module for Use with 400V BladeUPS System

The Eaton BladeUPS 400V uninterruptible power system (UPS) is compatible with a customer-supplied external battery only when used with the External Battery Interconnect. The addition of customer-supplied external batteries can extend battery runtime. Please note, this arrangement of customer-supplied external battery and external battery Interconnect is not for use with the BladeUPS 208V module. The External Battery Interconnect is a DC connection box that provides a landing for the wires from an external battery. The External Battery Interconnect converts external battery input wires to a plug that is compatible with the BladeUPS 400V.



Connect the External Battery Interconnect plug directly to the BladeUPS 400V module. Because there is a single UPS battery connector on the rear panel of the BladeUPS 400V module, you cannot use a combination of customer-supplied external batteries and Eaton-supplied extended battery modules (EBMs) with the same BladeUPS 400V module.Features

• Eaton 3U Extended Battery Module for Use with 400V BladeUPS System
• Doubles the amount of runtime available
• Can be used in parallel configuration when each unit has an interconnect
• Reliable source in environments where power sources are unreliable
• Never connect the External Battery Interconnect plug to an EBM
• The same customer-supplied external batteries cannot be shared by multiple BladeUPS 400V modules
• For consistent runtimes, each BladeUPS 400V module in parallel systems must have the same amount of battery runtime
• The customer-supplied external batteries are charged through the UPS internal charger
• To configure the BladeUPS 400V module for customer-supplied external batteries, configure the user setting for Watts per cell. For information on user settings, refer to the user's guide for the BladeUPS module
• A commissioning test is not required when using customer-supplied external batteries as long as ABM Technology feature is not disabled
• Internal BladeUPS batteries must be installed when using the External Battery Interconnect

Specifications

Electrical
Battery Type	Lead acid
Environmental
Environmental	Operating Temperature 0 to 40�C - Humidity 0 to 95%
General
Product Type	Battery
Physical
Pack Quantity	1
Dimensions	6.67cm (W) x 8.89cm (D) x 19.05cm (H) - Weight 1.45kg

Write a Review

Name *

Email *

Your Rating

Your Review*