Supermicro X10SLL-F

MBD-X10SLL-F-O
Supermicro X10SLL-F
Sorry, but this product is no longer available to purchase online.

Please contact us to discuss alternative products which may be suitable.
Looking for Compatible Products?
Product Description

Key Features

  1. Single socket H3 (LGA 1150) supports Intel® Xeon® E3-1200 v3, 4th gen. Core i3, Pentium, Celeron processors
  2. Intel® C222 Express PCH
  3. Up to 32GB DDR3 ECC 1600MHz UDIMMs in 4 sockets
  4. Dual Gigabit Ethernet LAN ports (1x Intel® i217LM & 1x Intel® i210AT)
  5. 2x SATA (6Gbps), 4x SATA (3Gbps)
  6. 1x PCI-E 3.0 x8 (in x16), 1x PCI-E 3.0 x8, and 1x PCI-E 2.0 x4 (in x8) slots
  7. 2x USB 3.0 (1 Type-A + 1 via header) 6x USB 2.0 (4 rear + 2 via header)
  8. Integrated IPMI 2.0 with KVM and Dedicated LAN
  9. SATA DOM power connector support
  10. VGA D-sub connector, TPM header

 

Features

Product SKUs
MBD-X10SLL-F
  • X10SLL-F (Bulk Pack)
 
Physical Stats
Form Factor
  • uATX
Dimensions
  • 9.6" x 9.6", (24.4cm x 24.4 cm)
 
Processor/Cache
CPU
  • Intel® Xeon® processor E3-1200 v3 and 4th Gen Core i3, Pentium, Celeron processors
  • Single Socket H3 (LGA 1150)
 
System Memory
Memory Capacity
  • 4x 240-pin DDR3 DIMM sockets
  • Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 8GB, 4GB, 2GB, 1GB
Memory Voltage
  • 1.5V, 1.35V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C222 Express PCH
SATA
  • SATA3 (6Gbps) w/ RAID 0, 1
  • SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Aspeed AST2400 with 10/100/1000M bps MAC
Network Controllers
  • Intel® i217LM + Intel® i210AT Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
VGA
  • BMC integrated Aspeed AST2400
 
Input / Output
Serial ATA
  • 2x SATA3 (6Gbps) ports
  • 4x SATA2 (3Gbps) ports
LAN
  • 2x Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB 3.0 ports (1 Type-A, 1 via header)
  • 6x USB 2.0 ports (4 rear, 2 via header)
VGA
  • 1x VGA D-Sub Connector
Serial Port / Header
  • 2x COM ports (1 rear, 1 header)
DOM
  • SATA DOM (Disk on Module) power connector support
TPM
  • 1x TPM 1.2 20-pin Header
Chassis ( Optimized for X10SLL-F )
1U Chassis
3U Chassis
Mid-Tower
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.

Expansion Slots
PCI-Express
  • 1x PCI-E 3.0 x8 (in x16) slot
  • 1x PCI-E 3.0 x8 slot
  • 1x PCI-E 2.0 x4 (in x8) slot
 
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • DMI (SMBIOS) 2.7
  • ACPI 5.0
  • USB Keyboard support
 
Management
Software
  • IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
  • SuperDoctor® III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI / ACPM Power Management
  • Main Switch Override Mechanism
  • Power-on mode for AC power recovery
  • Internal/External modem ring-on
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
  • 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
  • Total of five 4-pin fan headers supporting up to 5 fans
  • 5x fans with tachometer status monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • FC temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • +5V Standby alert LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
Parts List (Bulk Package)
  Part Number Qty Description
Motherboard MBD-X10SLL-F 1 X10SLL-F Motherboard
I/O Cables CBL-0044L 2 57.5CM SATA FLAT S-S PBF
I/O Shield MCP-260-00042-0N 1 STD I/O SHIELD FOR X9 SOCKET R SERVER MB
Quick Reference Guide MNL-1428-QRG 1 X10SLL(-F)(-S)(-SF)/X10SLM-F Quick Reference Guide



Reviews

Customer Reviews

There are currently no reviews against this product. Be the first to write a review!

Write a Review

Compatible Products

Sorry there are no compatible products listed. Please contact us to discuss options available for this product.

Downloads

Product downloads

There are currently no downloads available for this product. If you need a specific document, such as a manual, installation guide or datasheet please contact us and we would be happy to help.

YouTube

LinkedIn

Instagram

Call us today on 01283 576162 to talk directly to one of our server specialists

  • Secured by Sage Pay
  • PayPal