Supermicro X9SCL-F

Key Features

1. Single socket H2 (LGA 1155) supports Intel® Xeon® E3-1200 & E3-1200 v2 series, 2nd and 3rd Gen Core i3 processors***, Pentium, Celeron
2. Intel® C202 PCH Chipset
3. Up to 32GB DDR3 ECC 1333MHz / 1600MHz*** UDIMMs in 4 sockets
4. Intel® 82579LM and 82574L, 2x Gigabit Ethernet LAN ports
5. 6x SATA 2.0 with RAID 0, 1, 5, 10
6. 2x (x8) PCI-E 3.0*** in x8 slots and 1x (x4) PCI-E 2.0 in x8 slot
7. 9x USB 2.0 ports (2 rear + 6 via header + 1 Type-A)
8. Integrated IPMI 2.0 with KVM and Dedicated LAN 

Specifications

Product SKUs MBD-X9SCL-F -B X9SCL-F (Bulk Pack)   Physical Stats Form Factor uATX Dimensions 9.6" x 9.6", (24.4cm x 24.4 cm)   Processor/Cache CPU Intel® Xeon® processor E3-1200 & v2 series, Intel® 2nd Gen and 3rd Gen Core i3, Intel® Pentium® and Celeron processors *** * Socket H2 (LGA 1155)   System Memory Memory Capacity 4x 240-pin DDR3 DIMM sockets Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM) Memory Type 1333/1600MHz*** ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs DIMM Sizes 8GB, 4GB, 2GB, 1GB Memory Voltage 1.5 V Error Detection Corrects single-bit errors Detects double-bit errors (using ECC memory)   On-Board Devices Chipset Intel® C202 PCH chipset SATA 6x SATA2 (3Gb/s) w/ RAID 0, 1, 5, 10 IPMI Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC Network Controllers Intel® 82579LM and 82574L, 2x Gigabit LAN ports Virtual Machine Device Queues High efficient I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI) VGA BMC integrated Matrox G200 Super I/O Nuvoton NCT6776F   Input / Output Serial ATA 6 SATA 2.0 ports 6 SATA hard drives supported LAN 2x Gigabit Ethernet LAN ports:     Intel® 82579LM and Intel® 82574L 1x RJ45 Dedicated IPMI LAN port USB 9x USB 2.0 ports total (2x rear + 6x via header + 1x type A) VGA 1x VGA port Serial Port / Header 2x Fast UART 16550 serial port (one header and one rear port) DOM 1x DOM (Disk on Module) power connector TPM 1x TPM 1.2 20-pin Header   OS Compatibility • Please see our OS Compatibility Chart

Chassis ( Optimized for X9SCL-F ) 1U Chassis CSE-113MTQ-330CB CSE-512F-350B CSE-512F-441B CSE-811TQ-R441B CSE-813MTQ-350C CSE-813MTQ-441CB CSE-813MTQ-R400CB Important Chassis Notes To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.   Expansion Slots PCI-Express 2 (x8) PCI-E 3.0 in x8 slots*** 1 (x4) PCI-E 2.0 in x8 slots   System BIOS BIOS Type 32Mb SPI Flash EEPROM with AMI BIOS BIOS Features DMI (SMBIOS) 2.7 ACPI 4.0 PCI 2.3 USB Keyboard support   Management Software IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support SuperDoctor® III Watch Dog NMI Power Configurations ACPI / ACPM Power Management Main Switch Override Mechanism Power-on mode for AC power recovery Internal/External modem ring-on   PC Health Monitoring Voltage Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V FAN Total of 5 fan headers supporting up to 5 fans Five 4-pin fan headers 5x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors Temperature Monitoring for CPU and chassis environment CPU thermal trip support FC temperature sensing logic Thermal Monitor 2 (TM2) support PECI LED CPU / System Overheat LED +5V Standby alert LED Other Features Chassis intrusion detection Chassis intrusion header

	Parts List (Bulk Package)   Part Number Qty Description Motherboard MBD-X9SCL-F 1 X9SCL-F Motherboard I/O Cables CBL-0044L 2 57.5CM SATA FLAT S-S PBF I/O Shield MCP-260-00027-0N 1 STD I/O SHIELD * Per Intel's spec, for platforms using C202/C204 PCH:    1) Intel i5/i7 CPUs are not supported    2) Intel E3-12x5 series processors which have integrated graphics support are not recommended. ** Supermicro X9SCL-F motherboard is using a dedicated graphic from Matrox G200eW. *** BIOS rev. 2.0 or above is needed to support new E3-1200 v2 CPUs, which supports PCI-E 3.0 & DDR3 1600.



Write a Review